Grain Dryer

1. The application of counter-current drying, tempering and cooling technology makes the baked grain more close to the effect of natural drying.

2. Adopt high, medium and low temperature adjustment drying technology to ensure drying quality and reduce energy consumption.

3. Adopt uniform distribution technology of ventilation section, it can makes the whole grain layer evenly heated and dehydrated to ensure the uniform moisture of the grain after drying.

4. Double shell integrated design, waste heat recovery, reduce energy consumption, beautiful appearance and environmental protection.

The whole process of drying storage mechanization, online detection, intelligent control, automatic adjustment of drying temperature, video monitoring, fault alarm, one-click start and stop.


Contact Now E-mail Telephone WhatsApp
Product Details

Product Introduction


Intelligent grain drying system is suitable for the drying process of grain. It adopts advanced technology and control system, which can handle a large amount of grain efficiently and ensure the quality and safety of grain in the drying process.

Intelligent grain drying system consists of drying tower body, heating system, circulating fan, control system and so on. During the drying process, the grain is fed into the drying tower, and then the air is heated through the heating system to produce hot air. The hot air is blown uniformly to the grain pile through the circulating fan to evaporate the moisture on the surface and inside of the grain. At the same time, the control system monitors and regulates parameters such as temperature, humidity and wind speed in the drying tower to ensure the controllability and accuracy of the drying process.

Intelligent grain drying system is widely used in grain storage and processing industry. It can be used to dry a variety of grains, such as grain, beans, oilseeds and so on. By using the intelligent grain drying tower, farmers and grain processing enterprises can better manage and protect grain resources, improve grain quality and reduce losses, thus providing safer and better quality grain products to the market.


Features

1. Drying capacity: Grain tower dryers have a specified drying capacity in bushels per hour, which indicates the amount of grain that can be dried in a given time frame. The capacity of these dryers can vary depending on the model and size.

2. Temperature and air flow control: Grain tower dryers usually provide adjustable temperature and air flow control. These controls allow the operator to optimize the drying process by adjusting the temperature and air flow to achieve the desired moisture reduction in the grain.

3. Safety features: Safety is an important aspect of grain tower dryers. They are equipped with various safety features such as emergency shut-off switches, pressure relief valves, flame sensors and fire suppression systems. These characteristics help minimize the risk of accidents, equipment damage and fire.

4. Grain monitoring system: Modern grain tower dryers often have advanced monitoring systems. These systems provide real-time data on temperature, humidity and airflow throughout the drying process. They can also be programmed to automatically adjust Settings for optimal drying results.


Technical Specification

 

Model

Parameter

Capacity(t/d)

Precipitation

5%

Precipitation

10%

Precipitation

15%

Precipitation

20%

SHSN-100

300

150

100

75

SHSN-150

450

225

150

112

SHSN-200

600

300

200

150

SHSN-300

900

450

300

225

SHSN-500

1500

750

500

375

SHSN-600

1800

900

600

450

 

Product Inspection


Shandong Swan Cotton Industrial Machinery Stock Co.,Ltd will carry out strict comprehensive testing for each factory product, mainly including the following contents:

(1) . Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).

(2). Functional test: Check whether the function of the product is working properly. This can be done by operating the product, performing functional tests, or using specific test equipment to verify the performance and functionality of the product.

(3). Packaging inspection: check whether the packaging of the product is intact, whether the label is clear, and whether the packaging materials meet the requirements. This ensures that the product is not damaged during transportation and storage, and that it can be properly identified and identified.

(4). Label and instruction manual inspection: Check whether the label and instruction manual of the product are accurate, clear, complete, and comply with the relevant regulations and standards.

 Product Inspection.jpg

Packing and Delivery

 

1 Disconnect and remove: First disconnect the grain tower dryer from any power source or utility.Disassemble the dryer into smaller, easy-to-handle parts whenever possible.This facilitates packaging and transportation and reduces the risk of damage during transportation.

2. Clean the dryer: Before shipping, the packing staff will thoroughly clean the grain tower dryer, which will help prevent contamination and ensure safe transportation.

3. Fix loose parts: if there are loose parts or parts that cannot be removed, the packaging personnel will fix them tightly on the main body of the dryer.And use straps, ropes or other appropriate fixation materials to prevent them from moving and damaging during transportation.

4. Protection of vulnerable parts: Packers will use appropriate fillers, such as bubble wrap or foam, to protect vulnerable parts of the cereal tower dryer, such as control panels, electrical connections or vulnerable parts. This helps to cushion shocks and vibrations during transport.

5. Packaging with care: Our packing and shipping personnel will place the disassembled or filled parts of the grain tower dryer into the appropriate container to ensure that the container is strong enough to withstand the weight of the dryer during transportation. Use padding or filler material to fill any gaps and minimize movement within the packaging.


 Packing and Delivery.jpg

Company Information


Shandong Swan Cotton Industrial Machinery Stock Co., Ltd. is a listed company owned by Shandong Supply and Marketing Cooperatives. Its predecessor was founded in 1946. It collects scientific research & development, precision production ,marketing service and capital operation into a whole, and specially provides one-stop supply and service for mechanized ,intelligentized & informatized cotton processing equipments .Products have been exported to over 30 countries. The domestic market share ranks top for several years. The marketing service network spreads all over world main cotton production area.

Based on cotton machinery as main business, the company focuses on promoting the transformation and upgrading of cotton industry, creating a new era of smart factory, creating the first brand of cotton machinery in the world, actively expanding to the intelligent agricultural machinery equipment industry, and fully stepping into high-end equipment manufacturing industry.

 

Company Information.jpg

Company Information.jpg


Shandong Swan Cotton Industrial Machinery Stock Co., Ltd has four technical centers and manufacture bases in Jinan Shandong, Wujiaqu Xinjiang, Hailar Inner Mongolia and Montgomery USA , three national high-tech enterprises and six provincial innovation platforms , leading the technological progress of the industry for many years.It is a high-tech enterprise in Shandong Province, the technical support unit of "National Key Promotion Program of Scientific and Technological Achievements" and the undertaking unit of "13th five-year plan" National Key Research & Development Program.

 

Company Information.jpg

Company Information.jpg

Company Information.jpg


 


Leave your messages

Related Products

Popular products

x

Submitted successfully

We will contact you as soon as possible

Close