Tower Dryers

1. The application of counter-current drying, tempering and cooling technology makes the baked grain more close to the effect of natural drying.

2. Adopt high, medium and low temperature adjustment drying technology to ensure drying quality and reduce energy consumption.

3. Adopt uniform distribution technology of ventilation section, it can makes the whole grain layer evenly heated and dehydrated to ensure the uniform moisture of the grain after drying.

4. Double shell integrated design, waste heat recovery, reduce energy consumption, beautiful appearance and environmental protection.

The whole process of drying storage mechanization, online detection, intelligent control, automatic adjustment of drying temperature, video monitoring, fault alarm, one-click start and stop.


Contact Now E-mail Telephone WhatsApp
Product Details

Product Introduction

The intelligent grain drying system is suitable for grain drying process.It uses advanced technology and control systems to efficiently handle large quantities of grain and ensure the quality and safety of grain during the drying process.

The intelligent grain drying system is composed of drying tower, heating system, circulating fan, control system and other parts.During the drying process, the grain is fed into the drying tower and then the air is heated by the heating system to produce hot air.The hot air is blown evenly to the grain pile through a circulating fan to evaporate the water on the surface and inside the grain.At the same time, the control system will monitor and regulate the temperature, humidity, wind speed and other parameters in the drying tower to ensure the controllability and accuracy of the drying process.

Intelligent grain drying systems are widely used in grain storage and processing industries. Can be used to dry a variety of food, such as grain, beans, oil and so on.By using smart food drying towers, farmers and food processing enterprises can better manage and protect food resources, improve food quality and reduce losses, thus providing safer and high-quality food to the market.

Features

Grain tower dryers are used in the agricultural industry to efficiently remove moisture from grains such as corn, wheat, and soybeans. 

1. Energy saving: Most of the grain tower dryers use energy-saving design, thus reducing energy consumption and operating costs. These designs mainly include insulation, variable frequency drive (inverter) motor control, and heat recovery systems to recover waste heat.

2. Easy maintenance and cleaning: Grain tower dryers have access points for maintenance and cleaning. This includes removable panels, inspection Windows and clean doors.

3. Weather protection: Grain tower dryers usually have weather-proof structures. To achieve the purpose of protecting the grain from exposure to the natural environment. These structures can withstand harsh weather conditions and keep the grain inside safe and dry.

4. Mobility: The designer considered the mobility of the grain tower dryer in the design. They have wheels or a portable design that allows dryers to be easily moved from one grain storage location to another.


Technical Specification

 

Model

Parameter

Capacity(t/d)

Precipitation

5%

Precipitation

10%

Precipitation

15%

Precipitation

20%

SHSN-100

300

150

100

75

SHSN-150

450

225

150

112

SHSN-200

600

300

200

150

SHSN-300

900

450

300

225

SHSN-500

1500

750

500

375

SHSN-600

1800

900

600

450

 

Product Inspection

Shandong Swan Cotton Industrial Machinery Stock Co.,Ltd will carry out strict comprehensive testing for each factory product, mainly including the following contents:

 

(1) . Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).

(2). Functional test: Check whether the function of the product is working properly. This can be done by operating the product, performing functional tests, or using specific test equipment to verify the performance and functionality of the product.

(3). Packaging inspection: check whether the packaging of the product is intact, whether the label is clear, and whether the packaging materials meet the requirements. This ensures that the product is not damaged during transportation and storage, and that it can be properly identified and identified.

(4). Label and instruction manual inspection: Check whether the label and instruction manual of the product are accurate, clear, complete, and comply with the relevant regulations and standards.

 Product Inspection.jpg

Packing and Delivery

 

1. Disconnect and Disassemble: Begin by disconnecting the Grain Tower Dryer from any power source or utility. As much as possible, disassemble the dryer into smaller, easy-to-handle pieces. This will facilitate packaging and transportation and reduce the risk of damage during shipping.

2. Clean the dryer: Prior to shipping, the packer will thoroughly clean the Grain Tower Dryer, which will help prevent contamination and ensure safe transportation.

3. Fix loose parts: If there are loose parts or components that cannot be disassembled, the packers will fix them tightly on the main body of the dryer. And use straps, ropes or other appropriate fixing materials to prevent them from moving and being damaged during transportation.

4. Protecting fragile parts: Packers will use appropriate padding, such as bubble wrap or foam, which can protect the fragile parts of the grain tower dryer, such as control panels, electrical connections or fragile parts. This helps to cushion the shock and vibration during transportation.

5. Careful Packaging: Our packaging and shipping personnel will place the disassembled or filled parts of the Grain Tower Dryer into appropriate containers to ensure that the containers are strong enough to withstand the weight of the dryer during transportation. Use padding or filler material to fill any gaps and minimize movement within the package.


Company Information

Shandong Swan Cotton Industrial Machinery Stock Co., Ltd. is a listed company owned by Shandong Supply and Marketing Cooperatives. Its predecessor was founded in 1946. It collects scientific research & development, precision production ,marketing service and capital operation into a whole, and specially provides one-stop supply and service for mechanized ,intelligentized & informatized cotton processing equipments .Products have been exported to over 30 countries. The domestic market share ranks top for several years. The marketing service network spreads all over world main cotton production area.

Based on cotton machinery as main business, the company focuses on promoting the transformation and upgrading of cotton industry, creating a new era of smart factory, creating the first brand of cotton machinery in the world, actively expanding to the intelligent agricultural machinery equipment industry, and fully stepping into high-end equipment manufacturing industry.

 


Shandong Swan Cotton Industrial Machinery Stock Co., Ltd has four technical centers and manufacture bases in Jinan Shandong, Wujiaqu Xinjiang, Hailar Inner Mongolia and Montgomery USA , three national high-tech enterprises and six provincial innovation platforms , leading the technological progress of the industry for many years.It is a high-tech enterprise in Shandong Province, the technical support unit of "National Key Promotion Program of Scientific and Technological Achievements" and the undertaking unit of "13th five-year plan" National Key Research & Development Program.

 

Company Information.jpg

Company Information.jpg

Company Information.jpg



Leave your messages

Related Products

Popular products

x

Submitted successfully

We will contact you as soon as possible

Close