Grain Tower Dryer

1. The application of counter-current drying, tempering and cooling technology makes the baked grain more close to the effect of natural drying.

2. Adopt high, medium and low temperature adjustment drying technology to ensure drying quality and reduce energy consumption.

3. Adopt uniform distribution technology of ventilation section, it can makes the whole grain layer evenly heated and dehydrated to ensure the uniform moisture of the grain after drying.

4. Double shell integrated design, waste heat recovery, reduce energy consumption, beautiful appearance and environmental protection.

The whole process of drying storage mechanization, online detection, intelligent control, automatic adjustment of drying temperature, video monitoring, fault alarm, one-click start and stop.


  Contact Now E-mail Telephone WhatsApp
Product Details

Product Introduction


The intelligent grain drying system is suitable for grain drying process. Our company's grain dryers use advanced technology and control systems to efficiently handle large amounts of grain, and the quality and safety of grain in the drying process can be guaranteed.

The intelligent grain drying system is composed of drying tower, heating system, circulating fan and control system. During the drying process, after the grain is fed into the drying tower, the heating system immediately heats the grain to produce hot air.The hot air is blown evenly to the grain pile through a circulating fan to evaporate the water on the surface and inside the grain.At the same time, the control system will monitor and regulate the temperature, humidity, wind speed and other parameters in the drying tower to ensure the controllability and accuracy of the drying process.

Smart grain drying systems are widely used in the grain storage and processing industry. Can be used to dry a variety of food, such as grain, beans, oil and so on.By using smart food drying towers, farmers and food processors can better manage and protect food resources, improve food quality and reduce losses, thereby providing safer, high-quality food to the market.


Features


1.Drying capacity: Grain tower dryers have a specified drying capacity, measured in bushels per hour, which indicates the amount of grain that can be dried within a given time frame. The capacity of these dryers can vary depending on the model and size.

2.Temperature and airflow controls: Grain tower dryers typically offer adjustable temperature and airflow controls. These controls allow operators to optimize the drying process by adjusting the temperature and airflow to achieve the desired moisture reduction in the grain.

3.Safety features: Safety is a crucial aspect of grain tower dryers. They are equipped with various safety features such as emergency shut-off switches, pressure relief valves, flame sensors, and fire extinguishing systems. These features help minimize the risk of accidents, equipment damage, and fires.

4.Grain monitoring and control system: Modern grain tower dryers often have advanced monitoring and control systems. These systems provide real-time data on temperature, moisture levels, and airflow throughout the drying process. They can also be programmed to adjust settings automatically for optimal drying results.



 Technical Specification

 

Model

Parameter

Capacity(t/d)

Precipitation

5%

Precipitation

10%

Precipitation

15%

Precipitation

20%

SHSN-100

300

150

100

75

SHSN-150

450

225

150

112

SHSN-200

600

300

200

150

SHSN-300

900

450

300

225

SHSN-500

1500

750

500

375

SHSN-600

1800

900

600

450

 

Product Inspection

(1) . Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).

(2). Functional test: Check whether the function of the product is working properly. This can be done by operating the product, performing functional tests, or using specific test equipment to verify the performance and functionality of the product.

(3). Packaging inspection: check whether the packaging of the product is intact, whether the label is clear, and whether the packaging materials meet the requirements. This ensures that the product is not damaged during transportation and storage, and that it can be properly identified and identified.

(4). Label and instruction manual inspection: Check whether the label and instruction manual of the product are accurate, clear, complete, and comply with the relevant regulations and standards.

 Product Inspection.jpg

Packing and Delivery

 

1. Disconnect and remove: First disconnect the grain tower dryer from any power or utility.Break the dryer into smaller, easier to handle parts whenever possible.This can facilitate packaging and transportation and reduce the risk of damage during transportation.

2. Clean the dryer: Before shipping, the packing staff will thoroughly clean the cereal tower dryer, which will help prevent contamination and ensure safe transportation.

3. Fixing loose parts: if there are loose parts or parts that cannot be removed, the packing personnel will firmly fix them on the main body of the dryer.And use straps, ropes or other appropriate securing materials to prevent them from moving and damaging during transportation.

4. Protect vulnerable parts: packers will use appropriate fillings, such as bubble wrap or foam, to protect vulnerable parts of the grain tower dryer, such as control panels, electrical connections or vulnerable parts. This helps to cushion shocks and vibrations during transport.

5. Packing with care: Our packing and transportation personnel will place the removed or filled parts of the grain tower dryer into the appropriate container to ensure that the container is strong enough to withstand the weight of the dryer during transportation. Use padding or filler material to fill any gaps and minimize movement within the packaging.

 Packing and Delivery.jpg

Company Information


Shandong Swan Cotton Industrial Machinery Stock Co., Ltd. is a listed company owned by Shandong Supply and Marketing Cooperatives. Its predecessor was founded in 1946. It collects scientific research & development, precision production ,marketing service and capital operation into a whole, and specially provides one-stop supply and service for mechanized ,intelligentized & informatized cotton processing equipments .Products have been exported to over 30 countries. The domestic market share ranks top for several years. The marketing service network spreads all over world main cotton production area.

Based on cotton machinery as main business, the company focuses on promoting the transformation and upgrading of cotton industry, creating a new era of smart factory, creating the first brand of cotton machinery in the world, actively expanding to the intelligent agricultural machinery equipment industry, and fully stepping into high-end equipment manufacturing industry.

 

Company Information.jpg

Company Information.jpg


Shandong Swan Cotton Industrial Machinery Stock Co., Ltd has four technical centers and manufacture bases in Jinan Shandong, Wujiaqu Xinjiang, Hailar Inner Mongolia and Montgomery USA , three national high-tech enterprises and six provincial innovation platforms , leading the technological progress of the industry for many years.It is a high-tech enterprise in Shandong Province, the technical support unit of "National Key Promotion Program of Scientific and Technological Achievements" and the undertaking unit of "13th five-year plan" National Key Research & Development Program.

 

Company Information.jpg

Company Information.jpg

Company Information.jpg

Company Information.jpg


 


Leave your messages

Related Products

Popular products

x

Submitted successfully

We will contact you as soon as possible

Close