Spindle Bar Assembly for Cotton Harvester-manufacture,factory,supplier from China

Products Introduction It is a complete cotton picker spindle assembly to suit popular John Deere Cotton Pickers. This complete unit is ready to install. Technical Specificationweight 11kgMiddle package dimension 198mmLargest package dimension 1092mmSmallest package dimension 127mm Product Inspection Shandong Swan Cotton Industrial Machinery Stock Co.,Ltd will carry out strict comprehensive testing for each factory product, mainly including the following contents: (1).

Product DescriptionIt is a complete cotton picker spindle assembly to suit popular John Deere Cotton Pickers. This complete unit is easy to install.Specificationweight24.0537 pound    11kgMiddle package dimension7.8 inch          198mmLargest package dimension43  inch        1092mmSmallest package dimension5  inch          127mmPacking&DeliveryCompany InformationShandong Swan Cotton Industrial Machinery Stock Co., Ltd.

Products Introduction JD Cotton Picker Spindle bar Shaft (20 holes),it suit for all models of the John Deere cotton pickers, it can fit for 20pcs spindles. Technical Specification weight       11kgMiddle package dimension     198mmLargest package dimension      1092mmSmallest package dimension      127mm Product Inspection Shandong Swan Cotton Industrial Machinery Stock Co.,Ltd will carry out strict comprehensive testing for each factory product, mainly including the following contents: (1).

SpecificationWeight0.431 lb  0.195kgheight1.1 in    28mmlength4.9 in     124.5mmCompany InformationShandong Swan Cotton Industrial Machinery Stock Co., Ltd. is a listed company owned by Shandong Supply and Marketing Cooperatives. Its predecessor was founded in 1946.

Products Introduction At the front of the machine, there is a rotating spindle that rotates at high speed. This spindle has steel barbs or spindles that pass through the cotton plants, grabbing the cotton fibers and pulling them from the plant. The cotton fibers are then stripped from the spindles and collected.The cotton harvester machine also has mechanisms to separate the collected cotton fibers from any leaves, stems, or other debris that may be gathered with the cotton.

Product Description · Designed specifically for the cotton harvesting process.· Urethane compound allowing for flexibility, offer longer lifespan than other brand.· Special design allow for proper distribution of spindle cleaner – maintaining spindle effectiveness, but distribution at a correct rate to reduce overall cost of operation.· Designed to properly seat on the moisture column fin to improve performance and reduce wear rates due to improper fitting.Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      wi

Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      width2.65in   67.3mmlength2.7in    68.57mm   Product Inspection(1). Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).(2). Functional test: Check whether the function of the product is working properly.

DescriptionTomato harvester with model of 4FZ-1.5 is the first batch of domestic tomato harvesting equipment independently developed and produced by our company in 2024, filling the gap in the domestic industry. After several rounds of harvesting tests, our products can reach the harvesting capacity of 85 tons per hour, containing 2% impurity rate and 1.3% crushing rate.

SpecificationItemUnitSPECMaximum Operation Efficiencyt/h80Rated PowerKw/hp221/296Overall Dimension(L*W*H)Transportation Positionmm11510x3490x3650Working Positionmm11510x5400x6200WeightKg13740Fuel Capacity Main fuel tankL220Auxiliary fuel tankL180 Working Widthmm1500-1900Walking Method/Full-time hydraulic four-wheel driveWalking Speed Cotton Field  Grade 1Km/h0-6 Cotton Field  Grade 2Km/h0-9 Highway Road 1Km/h0-16 Highway Road 2Km/h0-27 fruit Vine Separation Mechanism/Three component vibrator Color Sorter Channelpcs48Wheel Basemm2750Highway Turn

Product Introduction Cotton ginning machine with MY96-17 was designed for small ginning factory, depends on the quality of the seedcotton, capacity of it can be 600kg to 1300kg per hour. It mainly use for separating fiber from the seeds and remove impurities from the raw cotton. The whole ginning machine with the characteristics of stable and high efficient.

Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      width2.65in   67.3mmlength2.7in    68.57mm   Product Inspection(1). Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).(2). Functional test: Check whether the function of the product is working properly.

DescriptionTomato harvester with model of 4FZ-1.5 is the first batch of domestic tomato harvesting equipment independently developed and produced by our company in 2024, filling the gap in the domestic industry. After several rounds of harvesting tests, our products can reach the harvesting capacity of 85 tons per hour, containing 2% impurity rate and 1.3% crushing rate.

DescriptionTomato harvester with model of 4FZ-1.5 is the first batch of domestic tomato harvesting equipment independently developed and produced by our company in 2024, filling the gap in the domestic industry. After several rounds of harvesting tests, our products can reach the harvesting capacity of 85 tons per hour, containing 2% impurity rate and 1.3% crushing rate.

DescriptionTomato harvester with model of 4FZ-1.5 is the first batch of domestic tomato harvesting equipment independently developed and produced by our company in 2024, filling the gap in the domestic industry. After several rounds of harvesting tests, our products can reach the harvesting capacity of 85 tons per hour, containing 2% impurity rate and 1.3% crushing rate.

Products IntroductionSwan 4500 grain harvester is a harvesting machine that can complete the process of harvesting, threshing, separating stalks, removing impurities and so on, and harvest grain directly from the field.

Products Introduction 4MZD-3 Three-rows cotton picker is a specific type of Cotton Harvester Machine that is designed to harvest cotton from three rows of plants simultaneously. This type of machine is commonly used in larger cotton fields or in areas where the planting density allows for efficient and effective harvesting using a three-row system.A cotton picker harvester, also referred to as a cotton picker or cotton harvesting machine, is specifically designed to pick the cotton bolls from cotton plants in the field.

DescriptionTomato harvester with model of 4FZ-1.5 is the first batch of domestic tomato harvesting equipment independently developed and produced by our company in 2024, filling the gap in the domestic industry. After several rounds of harvesting tests, our products can reach the harvesting capacity of 85 tons per hour, containing 2% impurity rate and 1.3% crushing rate.

Products Introduction Shandong Swan 4500 food combine harvester is a kind of harvester that can complete harvesting, threshing, separating straw, removing impurities and other processes, and harvest food directly from the field.High labor efficiency, low failure rate, suitable for large-scale grain planting areas. A wheat harvester, also known as a combine harvester, is a type of agricultural machinery specialized in harvesting wheat crops.

Products Introduction 4MZD-6 cotton picker is usually powered by a diesel engine, which provides the necessary power for the picking unit, gathering system and other machinery on the harvester. Modern cotton pickers may also employ advanced technologies such as GPS navigation systems and yield monitoring systems to improve efficiency and productivity.Product Details (1).

Product DescriptionSuit for all model of the JD cotton picker. Product SpecificationWeight 10.41 lb Height 4.3 in Width 6.5 in Length 39.7 inCompany InformationShandong Swan Cotton Industrial Machinery Stock Co., Ltd. is a listed company owned by Shandong Supply and Marketing Cooperatives. Its predecessor was founded in 1946.

Products Introduction The 4MZD-3 is a specific model of the three-row cotton harvester designed to efficiently harvest cotton from three rows of plants simultaneously.Several features and strengths of the model contribute to its performance in this area.Overall, the design of the 4MZD-3 three-row cotton picker optimizes the harvesting efficiency, saves labor costs, and increases productivity.Its solid structure, sophisticated technology, the characteristics of adjustable, make it suitable for the larger cotton fields and high density planting configuration.Its performance and ability to c

Products IntroductionSuit for the Swan, John Deere cotton picker and other brand.SpecificationWeight 1.162 lb           0.53kg Height 6.3 in             160mm Length 0.9 in             22.86mm  Product Inspection (1).

Product Description Cotton bale press is a kind of equipment used to compress and package lint cotton. The main function of the lint baler is to compress loose lint fibers into a compact package for storage and transportation. By packing, the size of the lint can be reduced, storage space can be saved, and it is easy to load and transport.

Product Introduction MY96-17 type cotton ginning machine was designed for small ginning factory, depends on the quality of the seedcotton, capacity of it can be 600kg to 1300kg per hour. It mainly use for separating fiber from the seeds and remove impurities from the raw cotton. The whole ginning machine with the characteristics of stable and high efficient.