Moisture Pad-manufacture,factory,supplier from China

Product Description · Designed specifically for the cotton harvesting process.· Urethane compound allowing for flexibility, offer longer lifespan than other brand.· Special design allow for proper distribution of spindle cleaner – maintaining spindle effectiveness, but distribution at a correct rate to reduce overall cost of operation.· Designed to properly seat on the moisture column fin to improve performance and reduce wear rates due to improper fitting.Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      wi

Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      width2.65in   67.3mmlength2.7in    68.57mm Product Inspection (1). Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).(2). Functional test: Check whether the function of the product is working properly.

Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      width2.65in   67.3mmlength2.7in    68.57mm   Product Inspection(1). Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).(2). Functional test: Check whether the function of the product is working properly.

Specificationweight0.07lb   0.031kgHeight0.65in   16.5mm      width2.65in   67.3mmlength2.7in    68.57mm   Product Inspection(1). Appearance inspection: Check whether the appearance of the product meets the requirements, including color, shape, size, surface finish and so on. This can be done by visual inspection or using auxiliary tools (e.g. microscopes, measuring instruments).(2). Functional test: Check whether the function of the product is working properly.

Product IntroductionA corn tower dryer, also known as a corn drying tower or corn drying system, is a specific type of equipment used for drying corn after harvesting. It is commonly used in agricultural settings to reduce the moisture content of corn to a safe level for storage or further processing.The intelligent grain drying system is suitable for the drying process of grain.

Product IntroductionA grain tower dryer is a type of equipment used in agriculture and specifically in grain storage and processing. It is used to reduce the moisture content of harvested grains, such as corn, wheat, or soybeans, to prevent spoilage and maintain the quality of the grain for storage or further processing.Features1. Drying capacity: Grain tower dryers have a specified drying capacity (in bushels per hour) that indicates the amount of grain that can be dried in a given time.2.

Product DescriptionSuit for all model of the JD cotton picker. Product SpecificationWeight 10.41 lb Height 4.3 in Width 6.5 in Length 39.7 inCompany InformationShandong Swan Cotton Industrial Machinery Stock Co., Ltd. is a listed company owned by Shandong Supply and Marketing Cooperatives. Its predecessor was founded in 1946.

Product IntroductionThe intelligent grain drying system is suitable for grain drying process.It uses advanced technology and control systems to efficiently handle large quantities of grain and ensure the quality and safety of grain during the drying process.The intelligent grain drying system is composed of drying tower, heating system, circulating fan, control system and other parts.During the drying process, the grain is fed into the drying tower and then the air is heated by the heating system to produce hot air.The hot air is blown evenly to the grain pile through a circulating fan to evap

Product IntroductionThe intelligent grain drying system is mainly used in the grain drying process. The grain drying system uses advanced technology and control system, which is conducive to efficient handling of large amounts of grain, ensuring the quality and safety of grain during the drying process.The intelligent grain drying system is mainly composed of drying tower, heating system, circulating fan, control system and so on. During the drying process, the grain is fed into a drying tower and the air is then heated by a heating system to produce hot air.

Product IntroductionMY158-17 model cotton ginning machine is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards. The processed lint cotton exhibits superior quality, low impurity content, excellent form, and possessing strong market competitiveness, thereby creating higher economic value for our customers.Product Characteristics1. Seed extraction system: The cotton gin separates the seeds from the cotton fibers.

Product Introduction Cotton balers are an important tool for the cotton industry, providing efficiency, cost savings and quality assurance throughout the cotton processing and supply chain. Cotton balers are used in the agricultural industry to compress raw cotton fibers into tight bales for transportation, storage and processing.The machine is commonly used in cotton processing plants, ginning mills and agricultural facilities where cotton is harvested.

Product Introduction MY96-17 type cotton ginning machine was designed for small ginning factory, depends on the quality of the seedcotton, capacity of it can be 600kg to 1300kg per hour. It mainly use for separating fiber from the seeds and remove impurities from the raw cotton. The whole ginning machine with the characteristics of stable and high efficient.

Product Introduction MY96-17 type cotton ginning machine was designed for small ginning factory, depends on the quality of the seedcotton, capacity of it can be 600kg to 1300kg per hour. It mainly use for separating fiber from the seeds and remove impurities from the raw cotton. The whole ginning machine with the characteristics of stable and high efficient.

Products IntroductionSwan 4500 grain harvester is a harvesting machine that can complete the process of harvesting, threshing, separating stalks, removing impurities and so on, and harvest grain directly from the field.

Product IntroductionMYZ215-14.8 cotton ginning machine is specially designed to meet the production needs of large or extra-large cotton ginning factory, designed output of this model can reach 2-3 tons, using a new type of extracting cotton feeding structure and a new working box parameter design. The overall design is scientific and reasonable, the products are stable and efficient, compatible and adaptable, and can meet the processing needs of cotton in different cotton producing regions in the world.

Product IntroductionMYZ215-14.8 cotton ginning machine is specially designed to meet the production needs of large or extra-large cotton ginning factory, designed output of this model can reach 2-3 tons, using a new type of extracting cotton feeding structure and a new working box parameter design. The overall design is scientific and reasonable, the products are stable and efficient, compatible and adaptable, and can meet the processing needs of cotton in different cotton producing regions in the world.

Product Introduction Cotton saw ginning machine MY158-17 model is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards.

Product IntroductionCotton saw ginning machine MY158-17 model is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards.

Product IntroductionMYZ215-14.8 cotton ginning machine is specially designed to meet the production needs of large or extra-large cotton ginning factory, designed output of this model can reach 2-3 tons, using a new type of extracting cotton feeding structure and a new working box parameter design. The overall design is scientific and reasonable, the products are stable and efficient, compatible and adaptable, and can meet the processing needs of cotton in different cotton producing regions in the world.

Product Introduction MY171-17 model cotton saw gin is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards.

Product Introduction MY149-17 model cotton saw gin is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards. The processed lint cotton exhibits superior quality, low impurity content, excellent form, and possessing strong market competitiveness, thereby creating higher economic value for our customers.Simultaneously, the cotton seeds are gathered in a separate compartment of the cotton gin.

Product IntroductionSaw-type lint cleaners are commonly used to improve the overall quality of ginned lint by removing foreign matter and less desirable short fiber after ginning.

Product Introduction Cotton saw ginning machine MY158-17 model is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards.

Product IntroductionCotton saw ginning machine MY158-17 model is specifically designed for separating fibers from the cotton seeds and cleaning the cotton seeds. It is equipped with high-quality imported components and its product design concept is aligned with international leading standards.